The EU Battery Regulation, QR Codes, and Battery Passports

The EU Battery Regulation, QR Codes, and Battery Passports

TL;DR

  • The EU Battery Regulation (EU) 2023/1542 sets rules for every battery sold in the EU, from production and labeling to recycling, including batteries from companies outside the EU.
  • Your obligations under the EU Battery Regulation depend on your battery type: portable, LMT, SLI, industrial, or EV.
  • From 18 February 2027, every battery sold in the EU needs a printed or engraved QR code that leads to key information, such as label details and disposal instructions.
  • From 18 February 2027, EV, LMT, and industrial batteries over 2 kWh will need a battery passport: a digital record for each battery, accessed by scanning its QR code.
  • A battery passport QR code must carry a unique ID for each battery that follows ISO/IEC 15459, such as a GS1 Digital Link QR code with a GTIN and serial number.
  • A battery passport system must control who sees what, use computer-readable data, and stay online even if the company behind it closes.
  • The company selling a battery in the EU is responsible for its battery passport, even if a provider runs it.

Regulation (EU) 2023/1542, or the EU Battery Regulation, is the law that sets rules on how batteries are made, labeled, sold, collected, and recycled in the EU.

The law follows a battery through its entire life, from the raw materials that go into it to the day it gets recycled. That’s what people mean when they say it covers the battery’s full lifecycle.

It applies to every battery sold in the EU, whether it was made in Europe or anywhere else.

Which Batteries the Regulation Covers

The Regulation covers all batteries and sorts them into five categories:

CategoryWhat it meansEveryday examples
PortableSmall, sealed batteries you can carry by handAA batteries, phone and laptop batteries
LMT (light means of transport)Batteries that power light electric vehiclesE-bikes, e-scooters
SLI (starting, lighting and ignition)Batteries that start a vehicle and power its lightsA car’s 12-volt starter battery
IndustrialBatteries made for industrial or professional useFactory equipment, energy storage systems
EV (electric vehicle)Batteries that power electric vehiclesElectric cars, vans, buses, trucks and heavier electric motorbikes

Many of the regulation’s requirements depend on the category, so knowing which category your battery belongs to is the first step in figuring out what you need to do.

Short History

Before this Regulation, the EU’s main battery law was Directive 2006/66/EC, or the Battery Directive. The old law focused mostly on what happens when a battery is thrown away. 

The new Regulation covers much more: how batteries are designed and made, what’s inside them, and how information about them is shared.

In EU law, a directive sets goals, and each country then writes its own national law to reach them. That’s how the old Battery Directive worked, and it led to slightly different rules from country to country.

A regulation works differently. It applies directly, word for word, in all EU countries at the same time, so everyone follows the same rulebook.

When the Regulation Started

The regulation arrived in 3 steps:

  1. 12 July 2023: The law was adopted.
  2. 17 August 2023: It officially entered into force.
  3. 18 February 2024: Its rules started to apply.

From there, new requirements kick in one after another, with some deadlines reaching into the 2030s. That’s why you’ll see many different dates throughout this post.

How it has changed since 2023

EU laws can be updated after they’re adopted, and this one already has been, four times:

  1. Regulation (EU) 2024/1781, the Ecodesign for Sustainable Products Regulation (ESPR), added a new step for battery passports. Companies must now register the unique ID of each battery that requires a passport in a central EU database, the DPP Registry (Article 77(10)).
  2. Regulation (EU) 2025/1561 gave companies more time for their due diligence obligations. Due diligence means checking that the raw materials in your batteries weren’t sourced in ways that harm people or the environment. The new start date is 18 August 2027.
  3. Regulation (EU) 2026/1738 updated the list of restricted substances in Annex I. This is the list of harmful materials, like mercury, cadmium, and lead, that batteries may only contain in very small amounts, if at all.
  4. Delegated Regulation (EU) 2026/1770 expanded the list of products whose batteries can be replaced by a repair professional instead of the user (Article 11(2)). It adds six product types, including smartwatches, fitness trackers and electric toys, and enters into force on 11 November 2026.

Each time a law is amended, the EU publishes a consolidated version: one clean document that combines the original text with all the changes. This guide follows the consolidated version of 13 August 2026. 

Because the law can change again, always check the latest consolidated version on EUR-Lex, the EU’s official legal database.

Warning: Older articles and guides may still list the original 2025 due diligence deadline or leave out the DPP Registry step. Check the date of any source you rely on.

The Battery Regulation at a Glance

Here is a summary of each chapter in the Battery Regulation. It is split into 14 chapters, each with multiple articles. 

Chapter I – Basic rules (Arts. 1–5)

Explains what the law covers: all batteries, including those built into products, except batteries for military or space equipment. It defines key terms and states that a battery can only be sold in the EU if it meets the rules in Chapters II and III.

Chapter II – Sustainability and safety (Arts. 6–12)

Limits harmful substances like mercury, cadmium, and lead. Larger batteries (EVs, e-bikes and e-scooters, and rechargeable industrial batteries) must declare their carbon footprint, and many batteries must include a minimum share of recycled materials. 

Batteries must also meet minimum performance and lifespan standards. From 18 February 2027, portable batteries built into most devices must be removable and replaceable by the user, and e-bike and e-scooter batteries by an independent professional (with some exceptions). 

Smartphones and tablets follow separate ecodesign rules instead. Stationary energy storage systems must pass safety tests.

Chapter III – Labels and information (Arts. 13–14)

Sets out what must appear on battery labels, including the crossed-out bin symbol and the QR code. Batteries with a built-in management system (EVs, e-bikes and e-scooters, and stationary storage batteries) must store data on battery health and expected lifespan.

Chapter IV – Proving compliance (Arts. 15–20)

Explains how manufacturers show their batteries meet the rules: testing, a signed EU declaration of conformity, and the CE mark. The declaration can be accessed through the QR code.

Chapter V – Approved testing bodies (Arts. 21–37)

Sets the rules for the independent bodies that check certain requirements, such as carbon footprint, recycled content, and responsible sourcing.

Chapter VI – Company responsibilities (Arts. 38–46)

Explains what manufacturers, importers, distributors, suppliers of battery parts, and logistics providers must each do. An importer or distributor that sells batteries under its own brand counts as the manufacturer. 

The chapter also covers reused and refurbished batteries, and requires companies to keep track of who they buy from and sell to.

Chapter VII – Responsible sourcing (Arts. 47–53)

Requires large companies (€40 million or more in yearly turnover) to check their supply chains for human rights and environmental risks linked to cobalt, lithium, nickel and graphite. These checks must be verified by an independent body and reported publicly. The rules apply from August 2027.

Chapter VIII – Collection and recycling (Arts. 54–76)

Makes battery producers pay for and organize the collection and recycling of used batteries. Shops must take back used batteries for free, and countries must meet collection targets. 

Recycling plants must recover set amounts of valuable materials. The chapter also covers giving used batteries a second life and how consumers are told to dispose of them; that information can be accessed through the QR code.

Chapter IX – Battery passport (Arts. 77–78)

Requires a digital passport for every EV battery, e-bike and e-scooter battery, and industrial battery over 2 kWh from February 2027. Covered in detail in Sections IV and V.

Chapter X – Enforcement (Arts. 79–84)

Gives national authorities the power to act against batteries that break the rules or are unsafe, including ordering them off the market.

Chapter XI – Public buying and new restrictions (Arts. 85–88)

Requires public authorities to consider environmental impact when buying batteries. It also sets out how new harmful substances can be added to the restricted list.

Chapters XII–XIV – Final rules (Arts. 89–96)

Covers how the Commission adds detailed rules, updates to related EU laws, penalties, a review in 2031, the replacement of the old 2006 Directive, and when each rule starts applying.

Note: The Regulation sets the main rules, but each country handles some details on its own:

  • Penalties: Each country decides the penalties for breaking the rules. The Regulation says penalties must be effective, fair, and strong enough to discourage violations. As a result, fines may vary between countries.
  • Authorities: Each country chooses which authorities will check if companies follow the rules. It also decides how these authorities are organized and how they carry out their work.
  • Producer registration and EPR monitoring: Companies help pay for collecting and recycling used batteries under extended producer responsibility (EPR). Each country registers producers, approves organizations that manage battery collection and recycling, and checks that companies follow the rules.

Since QR TIGER provides GS1 Digital Link 2D barcode generation, we will focus on two Chapters: Article 13 (Labels and QR codes)  and the digital battery passport.

Article 13: Information in Labels and QR Codes

Article 13 sets out what every battery must show: a physical label with key facts and symbols, and a QR code that leads to more information online. 

The labels and the QR code must be printed or engraved on the battery itself, and must be:

  • Visible: easy to spot;
  • Legible: clear enough to read;
  • Indelible: they won’t rub off, fade, or wash away over the battery’s life.

If that isn’t possible, or doesn’t make sense because of the battery’s size or type, they go on the packaging and on the documents that come with the battery, such as the instructions. 

LMT battery with QR code

Part 1: The Physical Label

Here is what information or symbols should be printed in the packaging or manuals

What

Applies toFrom when was it required
Cd / Pb symbolBatteries more than 0.002% cadmium or 0.004% leadAlready required (carried over from the old Battery Directive)
Crossed-out bin symbolAll batteries18 Aug 2025
General label (10 items, listed below)All batteries18 Aug 2026 or later
CapacityRechargeable portable, LMT and SLI batteries18 Aug 2026 or later
“Non-rechargeable” + minimum average running time in specific usesNon-rechargeable portable batteries18 Aug 2026 or later
QR codeAll batteries18 Feb 2027

Note: The 2026 date isn’t fixed. Those labels apply from 18 August 2026 or 18 months after the Commission publishes its detailed label specifications, whichever is later. The Commission was due to publish them by August 2025, so check whether they have been adopted before you finalize your label designs.

The 10 Items Seen on the General Label

  1. Who made it: the manufacturer’s name or trademark, postal address and, if available, website and email.
  2. What it is: the battery category and an identifier such as a model, batch, or serial number.
  3. Where it was made: the location of the factory.
  4. When it was made: month and year.
  5. How much it weighs.
  6. Its capacity: how much charge it can store.
  7. Its chemistry: for example, lithium-ion or nickel-metal hydride.
  8. Hazardous substances: any dangerous substances inside, other than mercury, cadmium or lead, which have their own rules.
  9. What to use if it catches fire: the suitable extinguishing agent.
  10. Critical raw materials: any critical raw materials making up more than 0.1% of the battery’s weight. These are materials the EU considers both economically important and at risk of supply shortages.

Crossed-out bin Symbol Size Rules

The crossed-out wheeled bin tells people: don’t throw this in the regular trash. It must:

- Cover at least 3% of the largest side on most batteries, or at least 1.5% of the surface on cylindrical cells, such as AA batteries;

- Never need to be bigger than 5 × 5 cm;

- Go on the packaging instead, at a size of at least 1 × 1 cm, if the battery is so small that the symbol would be smaller than 0.47 × 0.47 cm.

 -The Cd or Pb symbol goes beneath the bin symbol and must be at least a quarter of the bin’s size.

Part 2: The QR code

From 18 February 2027, every battery sold in the EU must carry a QR code. It doesn’t matter whether it’s a tiny button cell or a large industrial battery: all five categories need one

Battery typeThe QR code must lead to
Portable batteries and industrial batteries up to 2 kWhLabel information, EU declaration of conformity, due diligence report (where one applies), and disposal and safety information
SLI batteriesEverything in the row above, plus the share of recycled cobalt, lead, lithium or nickel
EV, LMT and industrial batteries over 2 kWhThe digital battery passport (see next section)

Here’s what those items mean:

  • Label information: everything on the physical label, as set out in Part 1.
  • EU declaration of conformity: the manufacturer’s official statement that the battery meets EU rules.
  • Due diligence report: large companies (€40 million or more in yearly turnover) must publish a report on how they check that their raw materials are responsibly sourced. This applies from 18 August 2027.
  • Disposal and safety information: how to make batteries last longer and give them a second life, how and where to return used batteries, how to handle them safely (especially lithium batteries), what the symbols on the label mean, and how harmful substances can affect people and the environment if batteries are thrown away carelessly.

The information behind the QR code must be complete, up to date, and accurate. A code that leads to a broken link or an outdated page doesn’t meet the rules. Keeping that information current is part of the brand's or manufacturer's job.

The QR code must:

  1. Stand out: have high contrast against its background.
  2. Be easy to scan: be large enough for a common QR reader, such as a smartphone camera, to read.

Batteries with a Second Life

Some used batteries get a second life. They may be prepared for reuse, repurposed for a new job (such as an old EV battery used for home energy storage), or remanufactured and restored to their original use.

These batteries need new labels or markings, and their change of status must be accessible through the QR code. Anyone scanning the code can then see that the battery has been given a second life.

A second life can change a battery’s category. An EV battery reused for home energy storage, for example, may become an industrial battery. If so, the new label and QR code must follow the rules for the new category.

Note: The Regulation doesn’t spell out everything. It doesn’t say whether the old label must be removed, or exactly what else the QR code should show beyond the new status. Expect more guidance from the Commission.

Article 77: The Battery Passport

GS1 QR code and battery passport

The battery passport is a digital record for an individual battery. Think of it as the battery’s ID card and life story in one: what it’s made of, how it performs, how it’s been used, and how to take it apart safely.

You reach it by scanning the battery’s QR code.

Which Batteries Need One

From 18 February 2027, a battery passport is required for each:

  1. EV battery: batteries that power electric cars, vans, buses and trucks;
  2. LMT battery: batteries for e-bikes and e-scooters;
  3. Industrial battery over 2 kWh: for example, factory equipment or energy storage systems.

The rule applies to every one of these batteries placed on the market or put into service from that date. Batteries already sold before 18 February 2027 don’t need a passport.

Note: The passport is per battery, not per model. Two identical batteries from the same production line each get their own passport. 

How it connects to the QR code

Each battery gets a unique identifier: a code that belongs to that one battery and no other. This means serial-level tracking (also referred to as item-level or unit-level tracking).

The company placing the battery on the market assigns it, and the QR code on the battery links to it.

For batteries that need a passport, the QR code and unique ID must follow ISO/IEC 15459 or an equivalent standard. This standard helps ensure that each ID is unique worldwide. 

Approved organizations, called issuing agencies, provide the codes used to create these IDs. GS1, the organization behind retail barcodes, is one of them. This means a GS1 identifier, such as a product code (GTIN) combined with a serial number, meets this requirement.

A GS1 Digital Link QR code is one way to meet the QR code requirement. However, creating the code and linking it to a unique ID does not mean the battery passport meets all the rules.

The information linked to the QR code must also follow the requirements. These may include providing multiple links for different users, setting access permissions, and making data available in a machine-readable format, such as JSON-LD.

Most GS1 QR code generators only create the code and link it to a web page. They may not have the tools needed to meet these other requirements.

Who is Responsible for the Linked Information

The company that places the finished battery on the market is responsible for the passport. Suppliers of cells, modules, or other parts are not. That company must make sure the passport information is accurate, complete, and up to date.

It can hand the work to someone else, such as a passport service provider, by giving written authorization. The legal responsibility still stays with the company.

Note: Outsourcing the passport doesn’t outsource the liability. If the data is wrong or missing, authorities will look to the company that placed the battery on the market.

Registering the ID with the EU DPP Registry

The company placing the battery on the market must upload the battery’s unique identifier to the EU’s central DPP Registry (Art. 77(10)). This requirement was added in 2024 by the Ecodesign for Sustainable Products Regulation (ESPR).

Only the ID goes into the Registry. The passport data itself stays with the company or its service provider, as explained in the next section.

What’s Inside the Battery Passport

The passport holds two kinds of information:

Model information: facts that are the same for every battery of that model, such as chemistry or carbon footprint.

Individual battery information: facts specific to that one battery, including how it has been used.

Not everyone can see everything. Annex XIII splits the information into access levels:

Access levelWho has accessWhat they see

Public

Everyone

Label information; materials, hazardous substances and critical raw materials; carbon footprint; due diligence report; recycled and renewable content; performance data (capacity, voltage, power, expected lifetime, warranty, efficiency, internal resistance); markings; EU declaration of conformity; disposal and safe-handling information

Restricted: model details

Persons with a legitimate interest, plus notified bodies, market surveillance authorities and the Commission

Detailed composition (cathode, anode and electrolyte materials), part numbers and spare-part sources, dismantling information, safety measures

Restricted: individual battery data

Persons with a legitimate interest onlyPerformance values at sale and after status changes, state of health, status (original, repurposed, re-used, remanufactured or waste), usage history such as charging cycles, accidents, temperatures and charge levels

Regulatory only

Notified bodies, market surveillance authorities and the CommissionTest report results proving compliance

Not every item applies to every battery.  The European Commission publishes a document called “Digital Batteries Passport – data point by category”, last updated 15 August 2026. It lists which data points apply to which battery category.

Who has a “legitimate interest”?

People with a legitimate interest are those who need the extra detail to do their job. The Regulation names two purposes:

  • Repair, second life and recycling: repairers, remanufacturers, second-life operators and recyclers need dismantling and composition information.
  • Energy markets: a battery’s owner, or someone acting for them, may need individual battery data to offer the battery’s storage capacity to energy companies.

The exact list of who qualifies, and what they may download, share or reuse, is set by a Commission implementing act, which was due by 18 August 2026.

Where the health data comes from

One key passport item, the battery’s state of health (SOH), comes from the battery itself.

Since 18 August 2024, Article 14 has required EV batteries, LMT batteries and stationary energy storage systems to keep up-to-date health and lifetime data in their battery management system (BMS), the built-in electronics that monitor the battery.

The battery’s owner, and anyone acting for them, must get read-only access to this data. That means they can view it but not change it. The BMS must also have a software reset function, so companies giving the battery a second life can install new software.

What happens throughout the battery’s life

The passport follows the battery, and responsibility for it can change hands:

What happens to the batteryWho becomes responsible for the passport

Becomes waste

The producer, its producer responsibility organization, or the waste management company it has chosen


Prepared for re-use, repurposed, or remanufactured

The company that puts it back on the market. The battery gets a new passport, linked to the original one.

Recycled

No one. The passport ceases to exist.

Article 78: How the Passport Works Technically

Article 77 says what the passport must contain. Article 78 says how it must work behind the scenes.

The Data Format

All passport information must be:

  • Built on open standards: no secret or proprietary formats;
  • Interoperable: able to work with other systems;
  • Free of vendor lock-in: you can move your data from one provider to another;
  • Machine-readable: a computer can read and use the data automatically, without someone having to read it and type it in again.

The Battery Passport Eight Ground Rules

There are eight essential requirements for every battery passport system:

  1. It must work with other EU product passports. The battery passport must be fully compatible with the digital product passports coming for other products under the Ecodesign Regulation.
  2. It must be free to access. Consumers, companies and others can view it at no cost, within their access rights.
  3. The responsible company stores the data. The company responsible for the passport, or a provider it authorizes, holds the data.
  4. Providers can’t misuse the data. A provider storing passport data may not sell it, reuse it or process it beyond the service it was hired for.
  5. It must outlive the company. The passport must remain available even if the responsible company goes out of business or leaves the EU.
  6. Editing rights are restricted. Who can add, change, or update information depends on their access rights.
  7. The data must be trustworthy. Its authenticity, reliability, and integrity must be guaranteed.
  8. It must be secure. The system must protect privacy and prevent fraud.
Keep in mind: Rule 5 is easy to overlook. Before choosing a provider, ask what happens to your passports if they, or you, stop operating.

EU Battery QR code vs. Battery Passport QR code

Details Basic battery QR codeBattery passport QR code
Applies toPortable, SLI and industrial batteries up to 2 kWhEV, LMT and industrial batteries over 2 kWh
Required from18 Feb 2027 18 Feb 2027 
What the code must containAny QR content that leads to the required informationA link to a unique identifier that complies with ISO/IEC 15459 or an equivalent (Art. 77(3))
Level of identificationPer batch in practice; the linked information must match the battery’s label (e.g. batch number and date of manufacture)Serialized or per individual battery; every battery has its own ID
Generic dynamic QR codeAllowedUsually not enough, as it typically carries the provider’s code rather than an ISO/IEC 15459 identifier
Registration with the EUNot requiredUnique identifier uploaded to the EU DPP Registry (Art. 77(10))
Data format rulesNone beyond the QR code being readableOpen standards, interoperable, no vendor lock-in, machine-readable, structured and searchable (Art. 77(5))
Technical system rulesNone specifiedEight essential requirements, including free access, security, data integrity, and restrictions on providers reusing data (Art. 78)

Start generating GS1 QR codes

Why is the EU Battery Regulation Important for the Industry and Customers

Batteries power how we live, work and travel. They will become even more important as we move away from fossil fuels. 

However, batteries also create problems, including hazardous substances, limited raw materials and large amounts of waste. The EU Battery Regulation addresses these issues with one set of rules covering a battery’s entire life, from sourcing materials to recycling.

Your responsibilities depend on your battery type, so identifying its category is the first step. 

Only electric vehicle (EV) batteries, light means of transport (LMT) batteries and industrial batteries over 2 kWh need a battery passport. These batteries contain valuable materials and offer greater potential for repair, reuse and recycling. Making these processes possible requires detailed information about each battery. 

Other battery types must also have a QR code that links to key information. Your battery’s category also determines which deadlines apply.

The EU plans to extend digital product passports to other products under the Ecodesign Regulation. Companies outside the EU must also follow the battery rules if they want to sell their products in the EU. 

As a result, these rules may also influence how batteries are managed in other markets.

FAQ

Is the EU mandating replaceable batteries?

Mostly, from 18 February 2027. Portable batteries in products such as laptops must be removable and replaceable by the end user with commercially available tools. 

Smartphones and tablets follow separate Ecodesign rules (Regulation (EU) 2023/1670), which allow professional-only replacement if the device meets durability and sealing conditions. E-bike and e-scooter batteries must be replaceable by an independent professional. 

What are the exemptions from the EU Battery Regulation?

The Regulation doesn’t apply to batteries for military and security equipment or for equipment sent into space. Batteries in safety equipment for nuclear plants skip only the labeling, QR code and passport rules.

Some rules have their own exemptions:

  1. Due diligence applies only to companies with €40 million or more in yearly turnover.
  2. User-replaceable batteries aren’t required for products used in wet conditions, such as electric toothbrushes, or for some professional medical equipment. For these, a repair professional must be able to replace the battery instead. Delegated Regulation (EU) 2026/1770 adds six product types, including certain wearables and, until 31 July 2030, certain rechargeable electric toys.
  3. Products that need constant power for safety or to protect their data are fully exempt from the replaceability rule.

What is the timeline for the EU Battery Regulation after February 2027?

Key dates include:

  • 18 August 2027: due diligence obligations start.
  • 31 December 2027: 63% collection target for portable batteries.
  • 18 August 2028 or 24 months after the delegated act, whichever is later: recycled content documentation starts for industrial batteries over 2 kWh, EV batteries and SLI batteries.
  • 31 December 2030: 73% collection target for portable batteries.
  • 18 August 2031: minimum recycled content becomes mandatory for industrial batteries over 2 kWh, EV batteries and SLI batteries.
  • 18 August 2036: recycled content minimums increase and extend to LMT batteries.

Carbon footprint and performance rules are also phased in by battery type between 2027 and the 2030s. Many dates can move later depending on when the Commission adopts detailed rules.

Click to view GS1 webinars

DISCLAIMER: We acknowledge that GS1, as well as the materials, proprietary items, and all related patents, copyright, trademark, and other intellectual property (collectively, “intellectual property”) relating to its use, are the property of GS1 Global, and that our use of the same shall be in accordance with the conditions provided by GS1 Global.